extender.linksys.com setup using WPS method or web interface?

Une « information » trouvée sur le net vous semble douteuse ?
Utilisez d’abord les boites de recherches "forum" en haut de cette page et "article" sur la page d'accueil, puis posez ici la question aux bénévoles de la Hoaxteam.
SVP : soyez explicite dans le titre du message et donnez vos sources : URL, copie du mail...
Messages : 1
Inscription : mer. mai 05, 2021 9:19 am

extender.linksys.com setup using WPS method or web interface?

Message par extenderlinksyscom » mer. mai 05, 2021 10:35 am

Extender.linksys.com Setup

There are two ways to install Linksys Range Extender in WPS mode. This means you can follow the WPS mode by pressing the WPS button on the Linksys Range Extender, or navigate to a web-based setup page such as extender.linksys.com and select the available one. web interface. provides three types of web interfaces. These two methods are explained below:

1) By physically pressing the WPS button: -

In this mode, all you have to do is press the WPS button on the Linksys WiFi Range Extender and then temporarily press the WPS button on the router. This keeps the details of the Linksys domain and network router in sync. So you can place it wherever you want and enjoy your Internet connection.

2) With the help of the extedner.linksys.com web interface: -

You have three options with this mode. You can choose one. These:

Botanical "Wi-Fi planning protocol": - To do this, first connect to multiple lanes using various devices connected to a cable or Wi-Fi connection. Follow the http://extender.linksys.com setup page to continue.
Then go to extender.linksys.com configuration server. After signing in, log in to Wi-Fi. Then go to the basic wireless settings. There is an option to configure Wi-Fi proteins and setup guides. Wi-Fi protein selection. To proceed, you need to follow the instructions in the first option where you have to click on the WPS bot on the client and then click on the image on the screen
The next process involves the user's PIN number. After entering the same device in the button.
The last and final step is to enter the serial number according to the customer's instructions.


This is the easiest way to install it on your new Linksys Wi-Fi network extension using the WPS model. Therefore, preferred users will follow the WPS method when it comes to the system.